Product | YG-1

YG-1 News

Story

Total

121

news

PRODUCT

YG-1 Expands Micro Grain Carbide Exchangeable Inserts i-One Drill Lineup with the New i-One Drill Inox in Metric and Inch Sizes
Adding New Exchangeable Inserts for Stainless Steel and Soft Steel Drilling YG-1 has expanded its micro grain carbide exchangeable insert i-One Drill lineup in metric and inch sizes with the launch of i-One Drill Inox, a new micro grain carbide insert series for stainless steel and soft steel machining. The addition broadens the exchangeable drilling system’s material coverage, which already includes steel and cast iron. i-One Drill Inox features a newly developed geometry that helps minimize thrust force, improve self-centering capabilities and break chips during machining. Optimized edge preparation strengthens the cutting edge and improves resistance to chipping under high cutting loads. The new inserts also feature YG-1’s Z-Coating, designed to resist heat and abrasive wear for longer tool life in stainless steel and soft steel applications. It can be replaced while the drill body remains mounted in the adaptor, helping reduce downtime. With i-One Drill Inox, the lineup offers more options across steel, cast iron and stainless steel. It is available in metric diameters from 10.00 to 33.50 mm and inch diameters from .3937” to 1.3189” supporting drilling depths of up to 8×D without pre-centering.
SEP 29, 2026
PRODUCT

YG-1 Expands YG Tap Hardened Lineup with New DIN-Standard HSS-PM Taps for Europe
New HSS-PM Spiral Flute and Spiral Point Taps Broaden Threading Options for Hardened Steels up to HRc 45 YG-1 has expanded its Solid Carbide and HSS-E YG Tap Hardened lineup for Europe with new DIN-standard HSS-PM spiral flute taps with a 15° helix angle and spiral point taps designed for tapping hardened steels in the HRc 25–45 range. Developed to meet European market requirements, the new taps feature an HSS-PM substrate that combines high wear resistance with excellent toughness. The TiCN coating supports consistent thread quality, stable machining performance, and long tool life when tapping hardened steels. They are suitable for a wide range of industries and applications, including die & mold, automotive, power generation, precision engineering, and repair and maintenance. With the addition of HSS-PM taps that complement YG-1’s existing HSS-E and solid carbide offerings, YG-1 provides a broader range of solutions for hardened steel threading.
SEP 28, 2026
PRODUCT

YG-1 Expands Its Solid Carbide Dream Drill Portfolio for Europe with a New 5×D Dream Drill X Series and Additional Forming Tap Pre-Drilling Sizes for Dream Drill X and Dream Drill Inox
Broader Holemaking Options for 5×D Drilling and Forming Tap Pre-Drilling YG-1 has expanded its Solid Carbide Dream Drill portfolio for Europe with a new internal-coolant flat shank series for Dream Drill X and additional pre-drilling sizes for forming tap applications in the Dream Drill X and Dream Drill Inox. The newly introduced DTX448 flat shank series of Dream Drill X providing 5×D drilling with internal coolant is available in diameters ranging from Ø3.0 to Ø20.0 mm. Additional drill diameters have also been added to match the recommended pre-drilling sizes for commonly used metric forming taps. These additional sizes are available in the DTX448 and DTX408 Dream Drill X series and the DH452 Dream Drill Inox series. With this expansion, YG-1 provides European customers with a wider selection of Dream Drill products for stable 5×D drilling and pre-drilling for forming tap applications.
AUG 31, 2026
PRODUCT

YG-1 Expands HSS-E Combo Tap Lineup with New Combo AOS Tap Series Across Global Markets
HiPIMS FSH-Coated Multi-Purpose Taps for Longer Tool Life and Reliability YG-1 has expanded its HSS-E Combo Tap product line with the launch of the new Combo AOS Tap series with advanced HiPIMS FSH-coating technology. Combo Tap is YG-1’s HSS-E multi-purpose tapping solution for customers machining a wide range of ductile materials across various machine tools. Building on these proven features, Combo AOS Tap incorporates advanced FSH-coating using the HiPIMS technology. The coating provides strong adhesion, high wear resistance, and a smooth surface finish, supporting longer tool life and stable tapping performance across a broad range of materials. The series is available in both Spiral Flute and Spiral Point configurations, with DIN standards for the EMEA region, DIN-length and ANSI-shank standards for the Americas, and JIS standards for Asia, meeting the regional needs for different threading requirements.
AUG 28, 2026
PRODUCT

YG-1 Expands Solid Carbide TitaNox-Power HPC with New Flute Types and an Expanded Size Range in the Americas
Broader Milling Solutions with New 7-Flute, 4- & 6-Flute High-Feed Types and an Expanded 5-Flute Sizes YG-1 has expanded its Solid Carbide TitaNox-Power HPC end mill lineup for the Americas with new flute types and additional sizes in the 5-flute range. The expansion includes newly added 7-flute end mills and 4- & 6-flute high-feed end mills, along with additional sizes in the existing 5-flute range. The newly introduced 7-flute end mills feature a purpose-designed geometry for stable deep axial engagement and higher feed rates. Unequal-index geometry supports stable, chatter-free machining, while chip-breaker options improve chip control in demanding applications. The new 4- & 6-flute high-feed end mills use a double-radius geometry with a helical gash to reduce cutting resistance when machining heat-resistant alloys. Center-coolant options also improve coolant delivery and chip evacuation. The existing 5-flute range has also been expanded with additional sizes in square and corner-radius types. With this expansion, YG-1 strengthens the TitaNox-Power HPC lineup for the Americas and offers a broader range of solid carbide end mill solutions for demanding applications in aerospace, medical, energy and general engineering industries.
AUG 28, 2026
PRODUCT

YG-1 Expands Solid Carbide Thread Mill Lineup with a Miniature Range for Hard Materials in the Americas
High Thread Precision in Small-Diameter Machining of Hard Materials YG-1 has expanded its Solid Carbide Thread Mill lineup for the Americas by adding a new miniature range designed for machining hard materials, including hardened steels and high-strength alloy steels. The new Miniature Thread Mills feature a left-hand cutting design that helps reduce cutting loads and are optimized for top-to-bottom climb milling to improve chip control and extend tool life. A straight-flute design with a two-thread profile and 0° helix angle provides stable machining performance. The combination of an AlTiN coating and a tough carbide substrate provides high wear and thermal resistance, particularly in dry machining conditions. The shank diameter and overall length have been standardized based on existing product ranges, allowing easier integration into current machining setups. With this expansion, YG-1 strengthens its thread milling portfolio and offers customers a broader range of reliable solutions in the Americas.
AUG 28, 2026
PRODUCT

YG-1 Expands Solid Carbide End Mill EV MILLS Stub Range with Broader Small-Diameter Options for Europe
Short-Shank Design and Reduced Overall Length Delivers Greater Cost Efficiency and Product Stability YG-1 has further expanded its solid carbide end mill EV MILLS range with additional small-diameter and corner radius options for Europe. Featuring a minimalistic shank and shorter cutting length, the EV MILLS stub range lowers carbide raw material and grinding costs, enabling a more attractive price position while maintaining cutting performance and product quality. The small-diameter offering has been expanded across the 2-, 3-, and 4-flute square end mill range. The 2- and 3-flute square items are now available in diameters down to Ø0.3 mm, while the 4-flute square items have been extended down to Ø1 mm. YG-1 has also introduced new 4-flute corner radius series, bringing some of the most in-demand configurations from its major product lines to the EV MILLS stub range. With this expansion, YG-1 is building on the continued success EV Mill in the market.
AUG 03, 2026
PRODUCT

Newly Introducing PVD Coated Turning Grade YG411 for Heat-Resistant Super Alloys
YG-1’s First-Choice Grade for High-Speed HRSA Turning YG-1 has launched YG411, a new PVD-coated turning grade specifically developed for high-speed turning of heat-resistant superalloys (HRSA). YG411 combines a specially engineered carbide substrate with an advanced high-aluminum-content PVD coating to deliver exceptional tool life, process reliability, and productivity in demanding HRSA applications. The substrate provides excellent resistance to heat and deformation, allowing the cutting edge to remain stable under the intense temperatures and forces generated when machining HRSA materials. The newly developed PVD coating delivers reliable performance across a wide range of cutting speeds. Its optimized composition provides excellent resistance to crater wear and oxidation, even during high-speed machining. A specially designed outer layer also protects the cutting edge against early-stage wear, improving performance consistency and extending tool life. By optimizing the balance between the substrate and coating, YG411 delivers outstanding thermal stability and consistent cutting performance in demanding HRSA turning applications, making it YG-1’s first-choice grade for high-speed turning. Application Range (ISO Range: S05 - S15) Grade Features - Ultra fine WC grain size provides excellent edge strength, while optimized thermal stability prevents plastic deformation. - The special engineered substrate features a precisely balanced composition that reliably withstand the intense heat generated during HRSA machining. - Superior oxidation resistance driven by high aluminum contents. - Special outermost coating layer to prevent initial cutting-edge damage. Applicable Component - Best choice for nickel contents super alloys, providing predictable tool life and exceptional performance at high cutting speed. - Designed to deliver reliable, predictable performance in demanding aerospace industry.
AUG 03, 2026
PRODUCT

YG-1 Launches Small Parts Machining Solutions, Marking a Strategic Expansion into a New Industry Segment
A Strategic Initiative to Drive Growth and Meet Evolving Precision Manufacturing Needs YG-1 has launched its small parts machining portfolio, marking the company’s entry into a new strategic industry segment and creating opportunities for future growth. As manufacturing requirements continue to evolve toward greater precision and more complex small-component production, YG-1 is strengthening its presence in precision manufacturing with a dedicated tooling portfolio for small parts machining. The launch represents an important milestone in YG-1’s long-term growth strategy and reinforces its commitment to expanding into new markets and application areas. The portfolio will be introduced first in the Americas market, with plans to gradually expand the portfolio into other regional markets. Recognizing that customer requirements, machining environments, and industry demands vary by region, YG-1 will use a regional approach to develop market-specific products configured to address the specific needs of local customers. It is designed to support the production of small to medium-sized components in compact or constrained machining environments through a focused, application-based tooling concept. By incorporating the most relevant tooling products for miniature and small-diameter machining applications, it reduces complexity in tool selection. Key industries include medical devices, electronics, watchmaking and jewelry, automotive and general machining, and space and flight systems. Leveraging YG-1’s global manufacturing expertise, premium carbide substrates, and advanced coating technologies, the portfolio delivers excellent stability, repeatability, and surface finish quality. It includes milling, threading, holemaking, and indexable insert solutions for steel, stainless steel, titanium, and non-ferrous materials. Following its launch, YG-1 will showcase its small parts machining portfolio at international and regional exhibitions and industry events.
JUN 30, 2026

1
2
3
4
5